PSA panacom PAN930FKHD Скачать руководство пользователя страница 22

Status  : Indicates the status of this channel. If set to on, the Door Station can be used   
             normally. If set to off, the Door S t a tion is disabled. The e n a b l e s w i t c h o f t h e 
             Door Station 1 is not adjustable and cannot be turned OFF.

Unlock time  : Indicates the unlocking time of the Door Station. The range is 1s-10s, and 
            the default is 2s.

Record mode  : There are two recording modes, Record and Snapshot. Record means that  
            when a visitor presses the call button of the Door Station, the indoor monitor with  
            the MicroSD card automatically starts recording until the end of the call or the user 
            presses the hang up button to manually stop. Snapshot means that when a visitor 
            presses the call button of the Door Station, the indoor monitor with the MicroSD card 
            automatically c a p t u r e s t h e p hoto of Door Station camera, and the user can also 
            manually press the setting button to continuously capture.

Motion detection  : Indicates whether to detect and record when an object moves in front of  
           the device.

Motion Detection Sensibility  : Indicates the sensitivity of motion detection. Including low, medium
            and high, low: indicates that the motion detection is difficult to trigger; medium: indicates 
            that the motion detection is easier to trigger; and high: indicates that the motion 
            detection is easy to trigger.

Motion detection duration  : The recording time of motion detection can be set to 1-5 minutes, 
            and the default is 1 minute.

Message  :  Indicates that if a visitor calls the indoor unit, the resident is not at home or fails   
             to answer whether to prompt the guest to leave a message and record the message. 
             This switch is turned off by default.

Message time  : Indicates how long the v i s i t o r c a n l e a v e a m e s s a g e after entering the 
            message state. Can be set to 30s, 60s, 120s, the default is 30s.

This interface can set the parameters of Door Station 1 and Door Station 2 respectively.

  Indoor unlock time  : Indicates the unlocking time of the indoor unit. The range is 1s-10s,
                        and the default is 2s.

15.3.2 Door Station Setting

Door 1

Door 2

On

Status

Auto

Signal mode

30s

Message time

Off

Message

20s

Motion detection duration

Medium

Motion detection sensibility

Off

Motion detection

Video

Record mode

2s

Unlock time

Auto

Signal type

Ring setting

Содержание panacom PAN930FKHD



































Отзывы: