PS Audio PerfectWave DirectStream, Руководство пользователя для владельца

Страница: 14 / 24

Quick Start Guide
©2014 PS Audio Inc. All rights reserved.
Owner’s Reference DirectStream DAC
15-061-01-1
4826 Sterling Drive, Boulder, CO 80301 Rev A
PH: 720.406.8946 support@psaudio.com www.psaudio.com Quick Start Guide
to turn DirectStream’s power on at least 3 hours before use.
Should DirectStream need to be rebooted, use the rear panel power switch to power cycle the
instrument. It's best to wait 30 seconds before powering back on.
SELECT THE INPUT
The fi rst step is to select the input
you wish to play. The input select is
on the touch screen. Touch the input
selected which is the visible input
icon already displayed. The input
selection list appears. Scroll through
the list and touch the input you wish
to play. The screen reverts back to
the main screen and the selected
input is displayed.
Each input has a lock light
associated with it. The lock light has two states: connected (green) and not connected
(red). This lock light indicator is located in the upper right hand corner of the input icon.
Some transports will not appear connected until you start to play the transport.
INPUT NAMING
For greater convenience it is
possible to assign a custom name
to each input such as PerfectWave
Memory Player, Apple TV, etc. To
name each input, touch the input
icon from the main screen. The
input list appears. Touch the small
edit icon of the input you wish to
name and the edit screen appears.
Type in the name of the product
and touch “SUBMIT”. If you wish
to return to the default input name,
go to the second keyboard screen (accessed by pressing the numeric key labeled 123/.!)
and touch “Restore Default”.
Input Selection
Input Naming
5