Installation and Operating Instructions
AV-3000 and AV-5000 Power Centers
2.6.1.4 Control Panel – Network
The Network page allows you to modify the network settings of your PS AV Power Center
unit. Please exercise extreme caution when modifying any settings as the incorrect
settings will result in loss of network connectivity.
Host Name
– The Host Name can be used to access your PowerPlay by typing a
name into your browser rather than the local IP address. To alter the Host Name
type the new name in the text field.
Enable DHCP –
PowerPlay is setup to rely on a DHCP enabled router or switch.
If you do not have DHCP enabled on your network or wish to set up your
PowerPlay as a static address on the local network you may choose to disable
DHCP by removing the checkbox. In order to maintain network connectivity you
must know and complete the network settings.
Direct Ethernet Connection
– By default this feature is disabled. Enabling
Direct Ethernet Connection turn the DHCP server of the AV Power Center on.
This feature is designed to be allow a direct connection for setup via a laptop or
desktop computer without a router.
4826 Sterling Drive, Boulder CO 80301
15-052-21-1 Rev B
PH: 720.406.8946 [email protected] www.psaudio.com
©2009 PS Audio International Inc. All rights reserved.
