PRx Performance Murphy Rack Скачать руководство пользователя страница 11

 

[email protected]  

11

 

»

Always consult a physician before beginning any exercise program

 

»

Read and understand warning labels and user manual prior to exercise. Obtain instruction prior 

to use

 

»

Keep body and clothing free from and clear of all moving parts

 

»

Inspect machine and wall mounting prior to use. DO NOT use if it appears damaged or 

inoperable

 

»

DO NOT attempt to fix a broken machine. Call PRx Performance® for assistance 701.566.0452

 

»

Use the machine only for the intended use. DO NOT modify the machine

 

»

Be sure that the pins are completely inserted. Use only the pins provided

 

»

Children must not be allowed near this machine. Teenagers must be supervised

 

»

Always use locking pins to secure rack in desired position

WARNING SERIOUS INJURY OR DEATH COULD OCCUR 

IF THESE PRECAUTIONS ARE NOT OBSERVED

IMPORTANT! DO NOT RETURN TO STORE

Please call or email PRx Performance regarding all installation questions or 

return concerns

701.566.0452    —   [email protected]

 Open 8am to 5pm (CST) Monday through Friday

—     prxperformance.com     —

1-Year Warranty PRx Performance

PRx Performance LLC warrants to the original consumer purchaser that this product will be free of defects in material and 
workmanship for one (1) year from the date of purchase. PRx Performance will repair or replace the product, at our sole 
option, in the event of such a defect within the warranty period.
In the event of a defect covered under this warranty, first call the number below. Many problems can be solved in this 
manner. If necessary, you will be instructed to return the product (postage pre-paid and insured by the consumer).
Enclose your name, address, telephone number, copy of dated sales receipt, and a brief explanation of the defect. 
Repair or replacement, and return shipment, will be free of charge. This warranty does not cover damage resulting from 
unauthorized modification, accident, misuse, or abuse. If the product is returned without a dated sales receipt, the product 
may be excluded from coverage under this warranty.
PRx Performance’s liability for defects in material and workmanship under this warranty shall be limited to repair or 
replacement, at our sole option, and in no event shall we be responsible for incidental, consequential, or contingent 
damages (except in those states that do not allow this exclusion or limitation). This warranty is exclusive, and is made in 
lieu of any express or implied warranty. Valid only in U.S.A. and Canada. This warranty gives you specific legal rights and 
you may have other rights, which may vary from state to state. Some states do not allow the exclusion of incidental or 
consequential damages, so the above exclusions or limitations may not apply to you.

• Phone number: 701.566.0452
• Hours: 8:00 A.M. – 5:00 P.M. Central Standard Time; Monday – Friday, expect some 

delay during busy times and holiday seasons.

Содержание Murphy Rack












Отзывы: