Prusa Original Prusa i3 MK2, Руководство пользователя

Страница: 4 / 46

Table of contents
About the author 3
Table of contents 4
2 Product details 6
3 Introduction 6
3.1 Glossary 6
3.2 Disclaimer 7
3.3 Safety instructions 7
3.4 Licenses 7
4 Original Prusa i3 MK2 printer 8
5 Original Prusa i3 MK2 printer kit 9
6 First steps 10
6.1 Printer unpacking and proper handling 10
6.2 Printer assembly 11
6.3 Setup before printing 11
6.3.1 PEI print surface preparation 11
6.3.2 Increasing the adhesion 12
6.3.3 Plugging the AC power 13
6.3.4 Selftest 13
6.3.5 Preparing the Z Calibration 14
6.3.5.1 Checking the Y­Axis (kit only) 14
6.3.5.2 Probe alignment (kit only) 14
6.3.5.3 Checking the Z­axis 16
6.3.6 Loading the filament into the extruder 17
6.3.7 Z Calibration 18
6.3.7.1 Finetuning the Z adjustment 19
6.3.7.2 Securing of the probe (kit only) 19
7 Printing 20
7.1 Printer Control 21
7.1.1 LCD screen 21
7.1.2 Print statistics 21
7.1.2 Silent vs. Hi­power mode 22
7.1.3 Factory reset 22
7.1.4 LCD layout 22
7.1.5 Print speed versus print quality 24
7.1.6 USB cable and Pronterface 24
7.2 Printer addons 26
7.2.1 Different nozzles 26
7.2.1.1 Hardened steel nozzle 27
7.2.1.2 0.25mm nozzle 27
8 Printer drivers 27
9 Printing your own models 27
9.1 Where you can get the 3D models? 27
9.2 In what program you can create your own models? 28
4