8
CSS 12
2.3
Quick Start Installation Guide
Before installing this product, turn pump off
CSS 12 Mounting Instructions
·
Your CSS 12 can be mounted outside near the pump and filter, or inside a pool equipment house or basement
·
There is a mounting bracket at the top of the Control Box.
·
Use appropriate mounting screws and hardware (not included) for the type of material you will be mounting to,
(brick, siding, concrete, etc.).
·
Make sure the Control Box is mounted in the vertical position, level, with no obstruction of airflow.
·
Control Box should be at least 4 feet above ground, preferably higher than filter.
Electrical System Connection
New Pool Installation
(Must be installed by a qualified electrician)
·
Your CSS 12 is a universal voltage system. It is preferable that this unit be wired so that it comes on when your
circulation pump is running and off when pump is off.
·
Your CSS 12 unit comes completely assembled, with the chlorine and ozone generators connected.
·
Do not add salt to the pool for at least 2 weeks, allow your pool surface to completely cure and harden.
·
You may turn on your Control Box and allow water to flow through the cell, (This will not damage the cell).
·
Run your CSS 12 while the pump is running so your new Ozone System can oxidize and purify your pool water.
·
It may be necessary to add chlorine to pool water during this process. After pool surface is completely cured,
refer to manual and add appropriate amount of salt.
Section 2
Product Installation
Grounding/bonding lug
The grounding/bonding lug on the bottom of the unit MUST be connected using
a 6AWG solid copper conductor (not included) to the equipotential bonding grid
(common ground point) of the swimming pool, along with any/all other pool
equipment. Generally, this equipotential bonding grid can be the structural
reinforcing steel of a concrete pool, the wall of a bolted/welded metal pool, or
similar assembly. It is highly recommended to install a sacrificial anode, somewhere
in the pool, (usually attached to the ladder).
Grounding lug
