2
INSTRUCTION MANUAL
1. Before performing any installation or operation, please read the enclosed instructions carefully.
2. This manual contains easy to follow step-by-step instructions and procedures to properly install and operate your new system.
3. The CSS-10 is electrically powered – electrical installation should be by a licensed electrician – ensure all electrical connections are proper
before operating this system.
4. Taking the time to properly install your new system will insure trouble-free installation and maximum performance.
INTRODUCTION
Congratulations! You have purchased one of the most technologically advanced Pool Sanitation Systems in the world – the Prozone CSS-10
Ozonating/Salt Generator. The cleanest and most powerful solution for Sanitation and Oxidation requirements in your pool, the benefits of which will
be evident from the very first time you use it and for many years to come.
HOW DOES IT WORK
The Prozone CSS-10 Ozone/Salt Generator System is comprised of two basic components: the Ozone System and a Salt Generator Cell. Both are
manufactured to meet stringent safety requirements and are built with corrosion resistant materials (Titanium/Platinum, Aluminum, etc.), to ensure
years of trouble free use in outdoor and indoor environments.
Chlorine Generation with Salt: Chlorine is generated within the Salt Generator Cell by an electrolytic reaction that converts the chlorine in salt to
hypochlorous acid, the useable form of chlorine for swimming pools. Once the initial amount of salt is added, only a small amount will be required
periodically to make up for losses due splashing.
Salt Water: Mild salt water is gentle on the eyes and skin. In seawater the salinity is approximately 35,000ppm (parts per million). The human body
has a salinity of approximately 4,500 to 6,000ppm, while fresh water is at zero. It is the similarity between the salinity of the human body and a pool
Chlorinated with CSS-10 (requires only 2,000ppm), that allows pool owners, and their families, to experience the ultimate in water sanitation, and
“Swimmer Friendly” clean, clear water
Ozone: Chlorine in pools normally reacts with bather loading to form combined chlorines. These combined chlorines are what causes odors,
irritation, and other unpleasant effects that are normally associated with a chlorinated pool. Ozone reacts with these combined chlorines, freeing
the chlorine for reuse and precipitating the contaminants for filtration. This reduces the need for chlorine and results in the cleanest, clearest water
available.
SAFETY WARNINGS AND GUIDELINES
FAILURE TO ADHERE TO THESES GUIDELINES WILL VOID WARRANTY
·
DO NOT ATTEMPT TO OPEN THE CSS-10 HOUSING. IT IS NOT A SERVICEABLE UNIT.
·
FOLLOW ALL INSTRUCTIONS AND FIGURES/DIAGRAMS.
·
DISCONNECT ALL POWER BEFORE INSTALLATION.
·
THE CSS POWER SUPPLY MUST BE MOUNTED VERTICALLY ON A FLAT SURFACE AND A MINIMUM OF 5 FEET FROM THE POOL
·
OBEY ALL LOCAL AND NATIONAL REGULATORY GUIDELINES PERTAINING TO ELECTRICAL AND POOL EQUIPMENT I
NSTALLATION AND USE.
·
CANADA AND SOME OTHER REGIONAL LOCAL CODES MANDATE THE USE OF GFCI PROTECTED CIRCUITS. IF INSTALLATION
IS COMPLETED BY A LICENSED ELECTRICIAN OR POOL EQIPMENT INSTALLER, THEY WILL BE REQUIRED TO VERIFY THIS
REQUIREMENT FOR YOUR AREA AND COMPLY DURING INSTALLATION.
·
THE GFCI SHOULD BE TESTED ON A REGULAR BASIS BY PUSHING THE TEST BUTTON ON THE FACE PLATE. IF FOUND FAULTY
REPLACE AND RETEST. DO NOT USE THE SYSTEM WHEN FAULTY.
