4
3
Mounting the device
3.1 Opening the device
Prior to opening the device, make sure to disconnect the mains voltage and
ensure that it cannot be switched back on again! The upper part of the housing
is locked to the lower part using two latches. Pull the side pieces (cover plates) of
the upper part of the housing outwards (see picture) to unlatch it and upwards
until the cover plate is opened.
3.2 Wall mounting
The device is mounted on the marked points. A drilling template is provided with
the device. Insert the "Quick Info" card provided with the device into the pocket
provided on the back of the device. The "Quick Info" card provides the user with
an overview of the functions to facilitate rapid device operation.
The controller must only
be installed in dry and
non-explosive areas. Mounting
the controller on an infl ammab-
le surface is prohibited
The controller must only
be installed in dry and
non-explosive areas. Mounting
the controller on an infl ammab-
le surface is prohibited
Prior to switching on or
commissioning the
device: make sure to close the
cover until both sides securely
lock into place!
Prior to switching on or
commissioning the
device: make sure to close the
cover until both sides securely
lock into place!
