16
12 Warranty conditions
The SOLAREG II controllers are carefully produced and tested on an automatic
testing station. If any failures occur, first check if there are any operation / setting or
system errors. Furthermore, check the pump and temperature sensor connections.
PROZEDA GmbH provides a 2-year warranty starting at the date of purchase and
according to the following conditions.
a) The warranty comes into effect if the purchased good exhibits a material or
quality defect. If the defect is caused by improper handling, by exceeding the
permitted values stated in the specifications, improper wiring, invalid technical
modifications to the device performed by the buyer or by an another company
other than PROZEDA GmbH, the warranty shall be void.
b) The warranty requires a written notice that describes the defect in detail as well
as a copy of the customer invoice.
PROZEDA GmbH can choose to fulfil the guarantee, at its own discretion, by one
of the following measures
- Repair (reconditioning) or
- Delivery of a fully functional replacement product
The device shall be repaired within 1 month after PROZEDA GmbH has received
it.
If the device is not repaired within the two repairs attempts, the buyer is enti-
tled to delivery of a fully functional replacement product.
If a replacement product is delivered, a new warranty that corresponds to these
conditions shall come into effect.
c) Any further warranty (redhibitory action, reduction of price) is excluded.
Warranty claims may only be submitted by the customer and are non-transferable.
If a defect occurs during the warranty period, please contact the supplier / installer.
When returning the device for warranty service, please make sure to send a descrip-
tion of the error and, if possible, the system diagram along with the wiring diagram.
13 Declaration of conformity
We, Prozeda GmbH, declare under our sole responsibility that the SOLAREG type
1316 product complies with the following standards:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 15 12.2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC
Law on the electromagnetic compatibility of equipment (EMC) of 26 February 2008
DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
12 December 2006 on the approximation of the laws of the Member States con-
cerning electrical equipment for use within certain voltage limits
DIN EN 61326-1, VDE 0843-20-1:2006-10 Electrical measurement, control and labo-
ratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2005);
German version EN 61326 -1:2006
DIN EN 61326-2-2, VDE 0843-20-2-2:2006-10 Electrical measurement, control and
laboratory use - EMC requirements - Part 2-2: Particular requirements - Test, operat-
ing conditions and performance requirements for portable test, measurement and
monitoring equipment for use in low voltage power supply systems (IEC 61326-2-
2:2005); German version EN 61326-2-2:2006
Operating manual for SOLAREG II ENERGY
1316BED051-20B-E, Stand 04/2009
