Prozeda Solareg II BASIC HE, Руководство по эксплуатации

Страница: 4 / 20

4
3 Mounting the device
3.1 Opening the device
Before opening the device, disconnect mains power and ensure that it cannot be
switched back on! The upper part of the housing is locked to the lower part using
two latches. Release the housing cover by pulling the sides outwards (see picture)
to unlatch it, and then pivot the cover upwards until it "clicks" open.
3.2 Wall mounting
The device is mounted on the points marked. A drilling template is provided
with a device. Insert the "Quick Info" card provided with the device into the cor-
responding pocket on the back of the device. The "Quick Info" card rapidly famil-
iarises users with the device.
Only install the control
unit in dry interiors not
subject to a risk of explosions.
Do not install the unit onto
flammable surfaces
Before switching on or
starting up the system:
Ensure the cover is closed – it
must snap securely into place on
both sides!