Proyecson PAA29+, Инструкция по эксплуатации

Страница: 34 / 54

INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011) 34
4. On the appearing “Send a Message” pop-up window, write the
following:
•
Message Label : Following report of the operation (optional).
•
Device Name : Select “Paa29+”.
•
Message Type : Select “Text”.
•
Message : Write in the dialog box the message in ASCII code
that will be sent to the PAA29+ when executing the macro cue.
See the ASCII commands on table from
APPENDIX B:
COMMANDS ASCII FOR DOREMI SERVER . You must write
the codes exactly as in the table, otherwise the PAA29+ may
not recognize them.
5. You can see an example of this from in the Figure 8.3.2C .
Figure 8.3.2C
6. Once the required macros are added, save the changes and then use
the macros in “Cinelister”. If you are not logged as admin, you will
need to be authenticated.
7. In order to check in advance the macros, use the “Macro Execution”
program in the “Doremi Labs Inc.” menu. In the
figure 8.3.2.D you
can see a snapshot of the “Macro Execution” program.