Proyecson PAA29+, Инструкция по эксплуатации

Страница: 29 / 54

INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011) 29
3. Select the tab “SERIAL AUTOMATION” to configure the serial port
server.
4. In the configuration box “SERIAL PORT SETTINGS” choose the next
parameters ( Figure 8.2B ):
•
Data rate = 9600.
•
Data bits = 8.
•
Parity = none.
•
Stop bits = 1.
•
Flow control = none.
5. In the configuration box “serial command settings” write “\0D” in the
configuration box “termination” and leave the configuration box “reset”
in blank as you can see in the
figure 8.2B example.
Figure 8.2B
6. Save the changes.
7. Copy on a USB “pendrive” the file “ DolbySerialAutomation_v1.txt ”
from the CD attached with the PAA29+. We strongly recommend that
the memory stick will have only this file; then follow the instructions of
the Dolby installation manual to import serial automation files.