User’s Guide • 2–11
Chapter 2 • Setting Up the Projection Panel
Video-ready projection panel models have three audio ports
labeled AUDIO IN LEFT (White), AUDIO IN RIGHT (Red)
and AUDIO OUT.
Stereo AUDIO IN
For true stereo audio when using a VCR or laser-disc, use the
supplied audio-visual cables to connect the audio source to the
projection panel.
1. Insert the white and/or red ends into the source’s AUDIO
OUT port(s).
2. Connect the other end(s) to the projection panel’s AUDIO IN
port(s). Be sure to connect Left to Left (White to White) and
Right to Right (Red to Red).
AUDIO IN
LEFT
RIGHT
AUD
OU
Figure 18
The projection panel’s AUDIO IN connector
3. Make the required adjustments in the Audio menu
(see page 3-19).
For true stereo audio when using a computer, use the cable
supplied with your sound card to connect the audio source to the
projection panel.
1. Insert the cable’s mini-jack into your computer’s AUDIO
OUT port.
2. Connect the plugs on the other end to the panel’s AUDIO IN
ports.
3. Make the required adjustments in the Audio menu
(see page 3-19).
Audio
Connections
