Proxim ORiNOCO AP-8000, Руководство пользователя

Страница: 141 / 178

Using CLI to Manage the Access Point AP-8000 User Guide
141
gps-latitude System GPS Latitude
gps-longitude System GPS Longitude
location System Location
phone-number System Contact Phone Number
system-name System Name Configuration
(config-mgmt-sys-sysinfo)# email name@Organization.com
(config-mgmt-sys-sysinfo)# system-name System-Name
(config-mgmt-sys-sysinfo)# phone-number 1234567890
(config-mgmt-sys-sysinfo)# location systemlocation
(config-mgmt-sys-sysinfo)# gps-altitude -121.8893
(config-mgmt-sys-sysinfo)# gps-latitude 37.3321
(config-mgmt-sys-sysinfo)# gps-longitude -121.8893
(config-mgmt-sys-sysinfo)#exit
(config-mgmt-sys)# exit
(config-mgmt)# exit
(config)# exit
Show command:
System Name# show management system information
// RUNNING-CONFIGURATION //
// System Information Configuration //
system {
description: System Description
country-code: BE
OID: 1.3.6.1.4.1.841
uptime: 0-02:09:24.39
name: System Name
contact-mail: name@Organization.com
phone-number: Contact Phone Number
location-name: System Location
gps-longitude: -121.8893
gps-latitude: 37.3321
gps-altitude: 10
productdescr: ORiNOCO AP-8000 @ WD v1.0.0 SN-08UT41110039 v2.0.0(303290)
}
System Management Configuration
To configure System Management parameters, use the following commands.
(config-mgmt)#system
(config-mgmt-sys)# management
(config-mgmt-sys-sysmgmt)# ?
Possible completions:
exit Exit from configure mode
factory-reset Management Factory Reset
restore System Managment Config Restore
NOTE: Use the below command to reset device to factory defaults. Note that device will restart automatically once the
reset operation is completed.
(config-mgmt-sys-sysmgmt)# factory-reset 1