Lynx.GX Installation and Management
To rack-mount the IDU and RFU:
1. Gather all the parts contained in the GX IDU Installation Kit.
2. Set the unit on a flat surface and, using a screwdriver, remove the front screws on each side of the unit that
match up to the holes of the rack mounting flange. You must remove these screws to prepare the unit for
bracket attachment.
3. Attach the “L” IDU Rack Mount Brackets to each side of the IDU using the long mounting screws that are
contained in the GX Rack Mount Screw Pack.
The following figure illustrates mounting bracket attachment for the IDU only (occupying one space in a 19-
inch rack).
1. Attach brackets to unit.
2. Attach brackets to 19” rack
Attach the “L” RFU Rack Mount Brackets to each side of the RFU using the long mounting screws that are
contained in the GX Rack Mount Screw Pack. The following figure illustrates mounting bracket attachment
for the combined IDU and RFU (occupying two spaces in a 19-inch rack).
1. Attach brackets to units.
2. Attach brackets to 19” rack.
Chapter 2. Installing the IDU and RFU
15
