15
14
Specifications
Specifications
Version 1.0
| 15 |
| 14 |
Version 1.0
Battery mount, status & charging
1.
Battery installation and unloading
2.
Battery power
During the installation, please confirm that the power switch is at “OFF / O” position.
Battery release button must be at the top, align the contact point of the battery against the cor-
responding contact point on the battery slot, slide battery in, and gently press until the battery is
locked in place.
When remove the battery from pulling tool, confirm the power switch is in the “OFF / O” position.
Press down the battery release button and remove the battery.
1. When the battery is installed in pulling tool, the battery status can be examined by opening
pulling tool and looking at the battery frame in the display screen on the fuselage.
2. There is a power display button and three LED power indicator lights on the top of the battery.
After pressing the button the battery status will be displayed:
1. Three LED lights are on and green, indicating a full battery.
2. One LED lights is off, the other two are green. If the indicator does not flicker, the power
levels is between 40% and 70%.
3. When only one LED light is green, use it after charging.
4. If the indicator light is red, please charge as soon as possible.
2.5 AH 25.2V DC
Lithium Battery
Battery
Release
Button
Power
Display
Button
LED Power
Indicator
Light
You need to use the original charger to charge the battery, after the battery loaded into pulling tool,
insert the power cord of the charger into power outlet, and the insert the plug of the charger into the
charging port of pulling tool:
The power value of short circuit protection: < 3W, the battery supply appliance can resume normal
operation when the short circuit is fixed.
High current protection value: 1 < 1.8a, the power supply will automatically return to normal opera-
tion after current value return to normal.
The charger can fully charge a battery in two hours.
Quick charging function:
When the charger is not in use, please unplug the charger from the power outlet. A charger connect-
ed to the power outlet will consumes power even if it is not connected to pulling tool. The battery will
be hot when charging, before using pulling tool, let the battery cool to room temperature.
Protection Functions
1. When the red light on the charger light up, the battery is charging.
2. When the red light turns green, battery has been fully charged. If the battery is not fully dis-
charged, the light will turn green in a short time.
1. Short circuit protection:
3.
Charge
2. High current protection:
