PW-MN527
300Mbps Wireless N USB Module
8
Chapter 1 Introduction
Thank you for choosing the
PW-MN527 300Mbps Wireless N USB Module
!
1.1 Overview of the Product
The module is an 802.11n client device. It is mainly designed to provide a high-speed and
unrivaled wireless performance for wireless embedded system application. With a faster wireless
connection, you can get a better Internet experience without the cost of running network cables.
With the 802.11n technology, the PW-MN527 auto-sensing capability allows high packet transfer
rate of up to 150Mbps for maximum throughput. It has good capability on anti-jamming, and it can
also interoperate with other wireless (802.11b/g/n) products. The module supports WEP, WPA
and WPA2 encryption to prevent outside intrusion and protect your personal information from
being exposed.
With unmatched wireless performance, reception, and security protection, it is easily to be used in
different kinds of wireless embedded system for its size and portable.
Note:
The PW-MN527 is designed to be used in the set-top box;
The Antennas printed on the PCB will not be in use under any circumstance.
1.2 Features
Complies with IEEE802.11n, IEEE802.11g, IEEE802.11b standards
Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption,
64/128-bit WEP encryption
Supports high rate of up to 300Mbps for maximum throughput, supports automatically
adjust to lower speeds due to distance or other operating limitations
Provides USB interface
Supports Ad-Hoc and Infrastructure modes
Good capability on anti-jamming
Supports roaming between access points when configured in Infrastructure mode
Ease to configure and provides monitoring information
Supports Windows XP, 7
