PW-MN527
300Mbps Wireless N USB Module
9
Chapter 2 Installation Guide
2.1 Hardware Installation
PW-MN527 has USB interface, and it is mainly designed to provide stability wireless function
and performance for your system.
For installation, you must be sure to connect this module to your device or system with a
connecting wire first. Then, the promoted Found New Hardware Wizard will pop up if the
Module is installed correctly.
2.2 Software Installation
Take PW-MN527 300Mbps Wireless N USB Module XP driver for example as below:
1. First decompress the driver package to the local PC. The generated x86 directory is for XP
32bit, and x64 directory is for XP 64bit.
2. Plug in the card and open the device manager. If the card has been installed before, please
uninstall it first.
3. Click
‘Update Driver…’ to update the driver
