53
The following table gives an explanation of each option/action available on this screen:
Field
Description
Array Name
User-friendly name that helps you identify the Array.
RAID Level
Configured when the RAID is created. The current
options are levels 0, 1, 0+1, 3, 5, 30, 50, linear and
JBOD.
Capacity
(MB)
Capacity of the Array in Megabytes.
Stripe Size
This parameter sets the size of the stripe written to
each disk. You can set the stripe size to 8k, 16k, 32k,
64k, 128k, 256k or 512k.
Max Re-
mapped BS#
The Maximum number of Bad Sector, which is 10,000.
Block Size
User can use this option to create the volume over 2TB.
For windows version:
1K
,
2K
and
4K.
For 64bit LBA mode:
512 bytes
. Due to LSI chip
limitation, 16 Byte CDB option must run at U320 mode.
Joined Slots
Select the disks that you want to join in the Array.
Volume Name
User-friendly name that helps you identify the Volume.
Capacity
(MB)
Capacity of the Volume in Megabytes.
Read Ahead
The Maximum number of Read Ahead is 99. The
controller will read ahead to optimize performance on
sequential reads.
Mapping
Channel
Mapping LUN(s) to a host channel. LUN mapping is the
process to make a
volume
visible to a desired host
channels.