19
2.3.2 Lock Indicator
Every Drive Carrier is lockable and is fitted with a lock indicator to indicate whether or
not the carrier is locked into the chassis or not. Each carrier is also fitted with an
ergonomic handle for easy carrier removal.
When the Lock Groove is vertical, then the Drive Carrier is unlocked.
When the Lock Groove is horizontal, this indicates that the Drive Carrier is locked.
2.3.3 Disk Drive Installation
This section describes the physical locations of the hard drives supported by the
subsystem and give instructions on installing a hard drive. The subsystem supports hot-
swapping allowing you to install or replace a hard drive while the subsystem is running.
a.
Make sure the Lock Groove is in unlocked position. Press the carrier open button
and the Drive Carrier handle will flip open.
b.
Pull out an empty disk tray. Pull the handle outwards to remove the carrier from
the enclosure.
c.
Place the hard drive in the disk tray. Make sure the holes of the disk tray align with
the holes of the hard drive.
Carrier
Open
Button
Drive Carrier
is locked
Drive Carrier is
Unlocked