NAS System
24
User’s Manual
3.2.1 Using Auto Configuration
If you select one of the Auto Configuration options, either with or without redundancy,
the following are the steps to configure RAID:
1.
When WebBIOS displays the proposed new configuration, review the information
on the screen, and click Accept to accept it. (Or click Back to go back and
change the configuration.)
RAID 0: If you select Automatic Configuration without Redundancy,
WebBIOS creates a RAID 0 configuration.
RAID 1: If you select Automatic Configuration with Redundancy, and
only two drives are available, WebBIOS creates a RAID 1 configuration.
RAID 5: If you select Automatic Configuration with Redundancy, and
three or more drives are available, WebBIOS creates a RAID 5
configuration.
RAID 6: If you select Automatic Configuration with Redundancy, and
the RAID 6 option is enabled, and three or more drives are available,
WebBIOS creates a RAID 6 configuration.
2.
Click Yes when you are prompted to save the configuration.
3.
Click Yes when you are prompted to initialize the new virtual drive(s). WebBIOS
CU begins a background initialization of the virtual drives.
