Provo Craft Cricut Imagine, Руководство пользователя

Страница: 32 / 140

32
If you fi nd that your Cricut Imagine
™
screen stops responding to any
touch input, it may require a forced recalibration. Follow these steps
to force a recalibration.
• Hold down the top and bottom buttons on the left of the Cricut
Imagine
™
screen.
• Press the Power button to power on the machine.
• Release the top and bottom buttons when you see the colored bars
appear on the screen.
• When the blue screen appears, click each of the white crosshairs to
fi nish the screen recalibration.
Print
This control allows you to calibrate the alignment of the Cricut Imag-
ine
™
print heads. It will repeat the print head alignment conducted
when you fi rst turned the machine on. If you fi nd that color reproduc-
tion for items printed with the Cricut Imagine
™
are lacking in fi delity,
using this recalibration may solve the issue. Print calibration should
also be done any time the print cartridge is removed or replaced.
Print calibration requires a clean 12
"
x 12
"
sheet of white paper
mounted on the cutting mat. Click the Print button and follow the
instructions on the screen.
Blade
This control allows you to calibrate the alignment of the cutting blade
of the Cricut Imagine
™
with respect to the printed image. It will repeat
the blade alignment conducted when you fi rst turned the machine on.
If you fi nd that the blade is not cutting out images within their default
borders, using this recalibration may solve the issue.
Blade calibration requires a clean 12
"
x 12
"
sheet of white paper
mounted on the cutting mat. Click the Blade and follow the instruc-
tions on the screen.
note:
Do not remove the mat after the calibration marks have been
cut next to the short vertical and horizontal lines labeled with num-
bers and letters, as the calibration process is still taking place.
After the cut and print are complete, the Cricut Imagine
™
will ask you
to select a number and letter for which the printed lines are cut most
accurately. It will then make a test cut and ask you to determine if the
cut stayed inside the printed lines.
SETTInGS