Fingerprint Time Attendance Terminal Manual
- 18 -
If the terminal sets repeat time validation and users repeat time record in the period of
the setting time. A vocal message will notice “thank you”. The LCD of the terminal will
illustrate “Auto adapt” and save the first time record.
If the password is verified, users click their registration number on the keyboard then
press “OK” and input password.
If the password verification is failed, terminal will display “please input again” after “Di
Di” ring.
3.2 - Quick Connection Guide
Basic procedure for quick connection:
1>
Connect the terminal to power supply.
2>
Select the communication mode for the terminal RS232, RS485, TCP/IP or U Disk.
(Please refer to
3.2.1\3.2.2\3.2.3\3.2.4
for specific connection method)
3>
Turn on the terminal.
4>
Install the fingerprint time attendance management software in PC.
Search the fingerprint time attendance terminal.Steps are Terminal
Administration-> Equipment Setting-> Adjust relevant settings -> Search.
Pass
verify
ID
PWD
00001
Pass
verify
ID
00001
Again
input!
