P2_PANTHER_user manual_ work basis_EN_03 - 07/11 - Protherm
- 30 -
NEED HELP?
Code
Description
F75
Permanent failure CH pressure sensor. No rise in pressure detected following pump
start
F76
Thermal fuse failure in primary exchanger
F80
Error in SHE entry sensor
F81
Error in charger pump
F82
Error in anode tester
F90
Not connected to APC module
F91
Error in APC module sensor
• When error codes displayed, press
RESET key. If following this measure
the equipment still does not work,
contact a quali
fi
ed technician.
10 Safety regulations
11 Servicing and maintenance of
the boiler
11.1 Cleaning
a
Turn off the device before
cleaning
The boiler cover may be cleaned with a
gentle liquid cleaner and damp cloth, then
wiped with a dry cloth.
i
Do not use abrasive cleaners
or solvents as these may harm
the paintwork.
11.2 Regular servicing
Regular servicing is very important in ex-
tending the lifecycle and safe and ef
fi
cient
use of your device.
b
Incorrect or inappropriate
servicing may negatively
impact the safe operation
of the equipment and may
result in injury.
We recommend annual servicing of the
equipment.
• Always call in a quali
fi
ed technician.
11.3 Replacement parts
To ensure safe operation and a lengthy
lifecycle for the product, you must use only
original parts from the manufacturer.
12 Regulations
In practice there may arise situations
in which you must take the following
unavoidable measures:
• Protect against (even the accidental)
starting up of the boiler during
inspection and work on the exhaust
gas, gas and water piping by shutting
off the electricity supply to the boiler in
ways other than by merely turning off
the boiler at the main switch (e.g. by
pulling the boiler plug from the electrical
socket),
• Always shut down the boiler when
fl
ammable or explosive vapours are
detected (even temporarily) in the
areas from which the boiler draws in air
for combustion (e.g. from oils for mixing
paints, the spreading and spraying of
molten materials, gas leaks etc.),
