Part 1: Operation
Changing the settings
11
Areas
General
Value selection summary
Service => for service engineers
Date/Time/Holiday => for users
Display
System value display (e.g. sensor values and setpoints).
No adjustments can be made. Operating errors are
therefore excluded in this area.
Users
Summary of settings that can be made by the operator.
Time programs
Summary of time programs for heating circuits, the hot
water circuit and extra functions where applicable
Expert
Summary of values for which expert knowledge is required
to make settings (installation technician).
E
Values in the expert level are protected by a code no.
(damage/malfunction possible).
Levels
The settings in the different areas are sorted into operating
levels
•
Installation
•
Hot
water
•
Heating circuit I
•
Heating circuit II
Installation
All display values and settings that relate to the heat
generator or the entire system and cannot be assigned to
a consumer circuit.
Hot water
All display values and settings that affect central hot water
preparation and circulation.
Heating circuit I / II
All indicator and set values that relate to the corresponding
consumer circuit (also, for example, as decentral hot-water
circuit).
!
An overview of all settings can be found on the
following pages.