Proteus PEC-2035 Series, Руководство пользователя

Страница: 4 / 8

IMPORTANT
READ ALL STEPS BEFORE ATTACHING PEDALS.
PEC-2035 SERIES / PEC-2055 / PEC-2075
HOME MAGNETIC CYCLE ASSEMBLY INSTRUCTION
- 3 -
STEP 1. ATTACH BOTH FRONT AND REAR STABILIZERS ( 02 / 03 ) TO MAIN FRAME ( 01 ) ,
FIX WITH CARRIAGE BOLTS ( 27 ) WASHERS ( 31 ) AND DOME NUTS ( 35 ).
STEP 2. a. ATTACH PEDALS ( 18 / 19 ) TO PEDAL CRANKS , ( PEDALS MARKED " L "
AND " R " INDICATES LEFT AND RIGHT SIDE OF BIKE. MAKE SURENOT TO
MIX ITS UP ).
b. LEFT PEDAL HAS LEFTHAND THREAD AND MUST BE TURNED
COUNTERCLOCKWIDE ( CCW ) TO ATTACH. RIGHT PEDAL HAS RIGHTHAND
THREAD , MUST BE TURNED CLOCKWISE ( CW ) TO ATTACH.
STEP 3. ATTACH SADDLE ( 13 ) TO SADDLE PLATE OF SEAT POST ( 04 ). FASTERN
WITH SPRING WASHERS ( 33 ) AND NYLON NUTS ( 34 ).
STEP 4. RELEASE KNOB ( 26 ) FROM SEAT POST SUPPORT ( ON MAIN FRAME ) SLIDE
SEAT POST INTO THE SEAT POST BOOT ( 14 ) THEN ATTACH SEAT POST ( 04 )
TO SEAT POST SUPPORT ( ON MAIN FRAME ) , ADJUST SADDEL TO DESIRE
HEIGHT AND TIGHTEN WITH KNOB ( 26 ).
ASSEMBLE HANDLEBAR POST
IF YOUR MODEL NO. IS PEC-2035/2035EP/2035GP/2075
PLEASE DO STEP 5.
IF YOUR MODEL NO. IS PEC-2055 PLEASE DO STEP 6.
STEP 5. a. RELEASE THE SCREW ( 29 ) FROM THE PARTS OF TENSION CONTROL ( 09 ).
b. INSERT TENSION CABLE ( 10 ) INTO HANDLEBAR POST ( 05 ) , PULL THE
TENSION CABLE OUT FROM MIDDLE HOLE OF HANDLEBAR POST ( 05 ).
c. CONNECT WIRE (A)( 11 ) AND WIRE (B)( 12 ) , THEN ATTACH HANDLEBAR
POST TO MAIN FRAME ( 01 ), FIX WITH BOLTS ( 28 ) AND WASHERS ( 31 ).
d. ASSEMBLE TENSION CONTROL ( 09 ) AND TENSION CABLE ( 10 ) , BY
CONNECTING CABLE HEAD ( ON KNOB ) TO THE DRAW HOOK OF
TENSION CABLE.
e. ASSEMBLE THE TENSION CONTROL ( 09 ) ONTO HANDLEBAR POST( 05 ).
NOTE THE FIX HOOK ( ON TENSION CONTROL ) WELL INSERTED ONTO
HANDLEBAR POST. THEN TIGHTEN WITH SCREW ( 29 ).
STEP 6. CONNECT WIRE (A)( 11 ) AND WIRE (B)( 12 ) MONITOR CABLE (A)( 40 ) AND
MONITOR CABLE (B)( 41 ) ( PLEASE REFER TO FIG. F ) THEN ATTACH
HANDLEBAR POST TO MAIN FRAME ( 01 ) FIX WITH BOLTS ( 28 ) AND
WASHERS ( 31 )
ASSEMBLE HANDLEBAR & MONITOR
IF YOUR MODEL NO
IS PEC-2035/2035EP PLEASE DO STEP 7.
IF YOUR MODEL NO IS PEC-2035GP/2055/2075 PLEASE DO STEP 8.
( PLEASE REFER TO FIG. A & FIG. B )