1. Safety Information
The following safety informations and all advices in this manual eventually have to be exten-
ded with the local safety standards which are valid at the installation site of this machine.
Before each use this machine have to be visually inspected! Check the following points:
- Density of all hydraulic components (pump, cylinder, tube, connectors)
- Frame is in good condition (no crack, bent or broken parts)
- No loose screws and nuts in sight
• Always wear safety helmet, face shield, hand gloves, saftey shoes and additional personal
safety equipment to prevent workplace accidents.
• Some parts being pressed may have a tendency to pop out of the press or explode un-
derpressure. Protect yourself accordingly. Keep hands away from the pressure head and
out of support rod holes. This press is designed for pressing, bending, and straightening
purposes only. DO NOT compress springs or other objects that could be ejected from the
press. DO NOT compress objects that could shatter.
• Always center the work piece on the table plates and center the pressure head on the work
piece to prevent injury by ejection of the work piece.
• Do not operate this press beyond it rated capacity.
• Please understand the max. working stroke before operate, Do not overload the max.
working stroke, so as not to damage parts.
This machine has to be yearly inspected by a technical surveyor for hydraulic compo-
nents. In this survey the following parts has to be inspected: All weld joints, Pump and
cylinder bases and sockets, All hydraulic tubes and hydraulic connectors
2. Specification
Manual table workshop press for assembly or straightening work.
560
380
236
156
100
150
Alle Angaben in mm
197
180
295 - 430
(K
olbenweg 135mm)
30-165
(∆135mm)
Ø
33
H:48
Ø
33
H:48
Ø
44
H:264
20
923
966
Ø10
Ø55
Type
WZWP-010MT
Max. Capacity
10t
Working height
up to 450 mm (for working heights >185mm disconnect piston
adapter)
Working width
-
Piston way
≤ 135 mm
Dimensions WxDxH
236 (without pump) x 560 x 966 (923) mm
Net weight
61 kg
6
EN
