15
16
PROGRAM FLOW CHART
LITHIUM POLYMER BALANCE CHARGE PROGRAM
CONNECTION DIAGRAM
CONNECTING THE CHARGER
The Prodigy 610 comes with male 4mm Bullet connectors attached to the power INPUT cables.
These cables are appropriate for attaching directly to most high-quality AC-DC power supply units,
such as ProTek R/C Super Pro 20 (13.8V, 20A). Also included are large Terminal Clips with matching
4mm female bullet connectors, for attaching directly to 12V car batteries. It is critically important that
you use either a fully charged 13.8 car battery or a high quality AC-DC power supply in the range of
11V~18V DC output, with minimum current rating of 20A to insure reliable performance.
CONNECTING THE BATTERY
Important!
Before connecting a battery it is absolutely essential to check one last time that you have
set the parameters correctly. If the settings are incorrect, the battery may be damaged, and could even
burst into flames or explode. To avoid short-circuits between the banana plugs, always connect the
charge leads to the charger first, and only then to the battery. Reverse the sequence when disconnecting
the pack.
4mm Bullet
Connectors
plugging
to eFUEL power
supply directly
Using terminal
clip attaching to
car battery
