©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
23-422
OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing a RadioShack Fast Ni-Cd/Ni-MH Battery Charger. Your charger
charges three different sizes of nickel-cadmium (Ni-Cd) or nickel-metal hydride (Ni-MH)
batteries — AA and AAA within 2.5 hours, and 9V within 10.5 hours. You can charge up to
eight AA/AAA batteries of the same type, or two 9V batteries, in the charger’s four battery
bays at the same time.
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety and
operating instructions for your charger.
Before you use the battery charger, read all
instructions and cautionary markings on the
charger, the batteries to be charged, and the
products that use the batteries.
o
• Do not expose the charger to rain or
excessive moisture.
• Any attachments not intended for use
with this battery charger can result in a
risk of fire, electric shock, or personal
injury.
• Never operate the charger if it has
received a sharp blow, or been dropped
or damaged in any way. Take it to your
local RadioShack for service.
• Do not disassemble the charger. Have it
serviced or repaired by qualified
RadioShack service personnel only.
Incorrect assembly can result in a risk
of electric shock or fire.
• To reduce the risk of electric shock,
unplug the charger from the outlet
before routine maintenance or cleaning.
• To reduce the risk of damage to the AC
adapter cord, disconnect the charger by
pulling the plug rather than the cord.
• Do not use an extension cord. Its use
could result in fire or electric shock.
• Do not operate the charger with a
damaged AC adapter. Take the charger
to your local RadioShack for service.
• Never alter the provided AC adapter. If
the AC plug does not fit in the AC outlet,
have a qualified technician install the
proper outlet. Improper connection can
result in an electric shock.
Never use the charger as a DC power
source for any electrical equipment.
SAVE THESE INSTRUCTIONS
GENERAL CHARGING GUIDELINES
• Completely discharge Ni-Cd batteries
before you charge them. Repeated
partial discharging and recharging can
shorten their useful life. This does not
apply to Ni-MH batteries.
• It is normal for batteries to become
warm while charging.
• You cannot charge two 9V batteries and
AA/AAA batteries at the same time.
However, you can charge one 9V in the
!
IMPORTANT
!
If an icon appears at the end of a paragraph,
go to the box on that page with the
corresponding icon for pertinent information.
o
— Warning
!
— Important
— Caution
Ó
— Hint
Ô
— Note
Alkaline Battery Protection — prevents your
charger from charging alkaline batteries.
Ô
Automatic Charging Current Selection — provides
the best charging current for each battery size.
Charging Indicators — light when the
batteries are charging.
Reverse Polarity Protection — protects the
charger and batteries against incorrectly
installed batteries.
Short Circuit
Protection —
protects the
charger if you
attempt to charge
shorted
batteries.
Delta V and Zero Slope Peak Voltage Full
Charge Detection — prevents overcharging a
fully charged AA or AAA battery. A back-up timer
provides additional overcharging protection.
Overcurrent Protection — maintains constant
charging current during the charge cycle.
AA/AAA Battery Bays
Bay Selector
Switch
9V Battery Bays
Charging
Indicator
(1–4)
Bad Battery Protection — prevents your
charger from charging bad batteries.
Ô
Ô
NOTE
Ô
The charger might not detect alkaline
batteries if you mix alkaline batteries and
rechargeable Ni-Cd or Ni-MH batteries in the
same charging bay.
o
WARNING
o
To reduce the risk of injury, charge only Ni-CD
or Ni-MH batteries with this charger. Other
types of batteries might burst, causing
personal injury and damage.
Fast Ni-Cd/Ni-MH Battery Charger
