ProTek R/C Prodigy 610 Скачать руководство пользователя

Страница: 19 / 22

WARNINGS AND ERROR MESSAGES

RECOMMENDED ACCESSORIES

The Prodigy 610 incorporates a various functions of protective and monitoring the system to verify

functions and the state of its electronics. In any case of occurring error, the screen displays the cause

of error that is self-explanatory with audible sound.

Incorrect polarity connected.

Battery connection is interrupted.

Short-circuit of the output termination.

Input voltage wrong.

The voltage of the battery pack has been selected incorrectly!

The charger has malfunctioned for some reason. Seek professional advice.

The voltage is lower than which is set. Please check the number of cells in the battery pack.

The voltage is higher than which is set. Please check the number of cells in the battery pack.

Voltage of one cell in the battery pack is too high; please check the voltage of each cell.

Voltage of one cell in the battery pack is too low, please check the voltage of each cell.

Wrong connection of the connector detected; please check the connector and cable.

The internal temperature of the unit goes too high. Cool down the unit.

The processor cannot control the feeding current, please repair it.

PTK-PRO-20A-SP

Super Pro 20 Power Supply

Temperature Sensor

PTK-BAL-EH-6S

Multi-Adapter Balance Board

PTK-BAL-XH-6S

Multi-Adapter Balance Board

PTK-BAL-HP-6S

Multi-Adapter Balance Board

PTK-5220

Multi-Connector Charge Lead

PTK-5224

Traxxas Charge Lead

PTK-5231

EC3 Style Charge Lead

PTK-5310

XT60 Charge Lead

PTK-BAL-TP-6S

Multi-Adapter Balance Board

PTK-5213

Futaba Charge Lead

PTK-5214

JST Charge Lead

PTK-5216

Ultra Plug Charge Lead

PTK-5217

Alligator Clip Charge Lead

Содержание Prodigy 610























Результаты поиска

Содержание Prodigy 610

Отзывы:

Похожие инструкции для Prodigy 610

Бренды по названию

Популярные бренды

ProTek R/C Prodigy 610, Инструкция по эксплуатации

Результаты поиска

Содержание Prodigy 610

Отзывы:

Похожие инструкции для Prodigy 610

Бренды по названию

Популярные бренды