Protege LCD User Station, Руководство пользователя

Страница: 64 / 94

62 Protege™ Integrated System User Manual
8.0 AREA GROUPS
Area groups are used to define what areas/partitions a user will be
able to view, arm and disarm. An area group is assigned to an access
level (Refer to the Access Levels Section on Page 51) to restrict the
ability for a user to control an area or partition. The Protégé system
supports up to 250 area groups.
8.1 ALL AREAS GROUP
The all areas group is a special area group that allows access to all
areas within the system. The all areas group is assigned to the
master access level by default.
Changing the all areas group is not recommended as
it will restrict access to the areas used by the Master
Access Level.
8.2 PROGRAMMING AREA GROUPS
Area groups should be programmed so that they are used for a group
of users, for example administration, warehouse and management
where the groups can clearly be identified by the areas that they
need to view, arm and disarm.
Programming Area Groups
Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.
In the example area group configuration area group
AG010 is being edited. Modifying the all areas group
is not recommended.