AS-6030 | ENGLISH
22
Red continuously lit
> Window transmitter is taught
in without furnace transmitter
Red and green lit
> Window transmitter and
furnace transmitter
are taught in
Green off
> Furnace transmitter
not taught in
Red off
> Window transmitter
not taught in
WINDOW TRANSMITTER
LED Status (5)
Off
> Rest state / Sleep mode
Green flashing
> Window is being opened
Red flashing
> Window is being closed
RED and GREEN flashing 0.5 s > Window transmitter
battery is discharged
FURNACE TRANSMITTER
Dark
> Rest state / Sleep mode
Green flashing
> FURNACE becoming cold
Red flashing
> FURNACE becoming hot
Battery control LED
flashing 0.5 s
> FURNACE transmitter
battery discharged
MALFUNCTIONS
Malfunctions can occur in individual cases due to overlaps
with other, similar radio devices. It is normally sufficient if
you check and, if necessary, adjust the positioning of the
components. If one of the transmitters is no longer reachable
(battery discharged, mechanically defective or no radio
reception), the control centre no longer interconnects as long
as the fault is present.
Deleting all TRANSMITTERS
1. Press the button (2) on the receiver for 2 seconds. The
LED Status (3) begins to flash red.
2. Press the button (2) for 2 seconds again. The LED Status
(3) stops flashing on the RECEIVER and the deletion is
completed for all TRANSMITTERS.
FUNCTIONAL TEST
The temperature at the thermo-sensor (10) of the furnace
transmitter (9) is crucial for the function testing of the
exhaust air control.
Thermo-sensor (10) of the furnace transmitter
is < 38°C
1. Switch ON exhaust unit and window is closed
> Exhaust unit must start up.
2. Open window
> Exhaust unit must remain on.
3. Close window
> Exhaust unit must remain on.
Thermo-sensor (10) of the furnace transmitter
is > 38°C
1. Switch ON exhaust and window is closed
> Exhaust unit must not start up.
2. Open window
> Exhaust unit must start up.
3. Close window
> Exhaust unit must switch off.
MEANING OF THE LED DISPLAYS
RECEIVER/CONTROL CENTRE
LED Status (3)
Red flashing Teach-in mode > No transmitter taught in
Green continuously lit
> Furnace transmitter is taught
in without window transmitter
Содержание AS-6030
