protech ProX-1695, Руководство пользователя

Страница: 64 / 95

Chapter 5 Award BIOS Setup
Prox-1695 USER
′
S MANUAL
Page: 5-17
PM CONTROL BY APM:
When set to “ Yes ”, an Advanced Power Management device will be
activated to enhance the Max. Power Saving mode and stop the CPU
internal clock.
VIDEO OFF METHOD:
This category determines the manner in which the monitor is blanked.
V/H SYNC+BLANK This selection will cause the system to turn off the
vertical & horizontal synchronization ports and
write blanks to video buffer.
BLANK SCREEN This selection only writes blanks to video buffer.
DPMS Initial display power management signaling.
VIDEO OFF AFTER:
When enabled, this feature allows the VGA adapter to operate in a power
saving mode. The available choices are as follows:
N/A Monitor will remain on during power saving
modes.
SUSPEND Monitor blanked when the systems enters the
Suspend mode.
STANDBY Monitor blanked when the system enters Standby
mode.
DOZE Monitor blanked when the system enter any
power saving mode.
MODEM USE IRQ:
This item enable you to name the interrupt request (IRQ) line assigned to
the modem (if any) on your system. Activity of the selected IRQ always
awakens the system.
DOZE MODE:
When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
STANDBY MODE:
When enabled and after the set time of system inactivity, the fixed disk
drive and the video would be shut off while all other devices still operate
at full speed.