protech ProX-1695, Руководство пользователя

Страница: 52 / 95

Chapter 5 Award BIOS Setup
Prox-1695 USER
′
S MANUAL
Page: 5-5
Time:
The time format is <hour> <minute> <second>. The time is calculated
based on the 24-hour military-time clock. For example, 1 p.m. is entered
as 13:00:00.
Primary Master/Slave:
Secondary Master/Slave:
The categories identify the types of 2 channels that have been installed in
the computer. There are 45 predefined types and 4 user definable types are
for Enhanced IDE BIOS. Type 1 to Type 45 are predefined. Type User is
user-definable.
Press <PgUp > or <PgDn> to select a numbered hard disk type or type the
number and press < Enter >. Note that the specifications of your drive
must match with the drive table. The hard disk will not work properly if
you enter improper information for this category. If your hard disk drive
type is not matched or listed, you can use Type “User” to define your own
drive type manually.
If you select Type User, the related information will be asked to enter.
Enter the information directly from the keyboard and press < Enter >. This
information must be included in the documentation from your hard disk
vendor or the system manufacturer.
If the controller of HDD interface is ESDI, the selection shall be "Type 1".
If the controller of HDD interface is SCSI, the selection shall be "None"
If you select Type “Auto”, BIOS will auto-detect the HDD & CD-ROM
Drive at the POST stage and showing the IDE for HDD & CD-ROM
Drive.
TYPE:
This is the number designation for a drive with certain identification
parameters.
CYLS.:
This is the number of cylinders found in the specified drive type.
HEADS:
This is the number of heads found in the specified drive type.