protech ProX-1550 Скачать руководство пользователя страница 52

Страница: 52 / 110

Chapter 3 Software Configuration

Prox-1550 USER

′

S MANUAL

Page:3-3

3-2-1. Installation of VGA Driver for PCI

1. Install VGA Driver to Windows 3.1

(1).

To install VGA driver to Windows 3.1, please insert Utility
Disk into floppy disk drive A/B or CD ROM drive under your
Windows 3.1 system, and go to directory where VGA driver is
located.

(2).

Click Setup.exe file for VGA driver installation directly.
Follow the instructions on the screen and complete the
installation.

(3).

Once installation is completed, you must shut down system
and restart in order for changes to take effect.

2. Install VGA Driver to Windows 95

(1).

Click START, SETTINGS, then CONTROL PANEL.

(2).

On CONTROL PANEL, click the DISPLAY icon and enter
the SETTINGS tab of the DISPLAY PROPERTIES window.

(3).

Select the SETTINGS page, push the CHANGE DISPLAY
TYPE button. Click the CHANGE button in the “Adaper
Type” area.

(4).

Push the “HAVE DISK BUTTON” and press OK.

(5).

Specify the path for the new driver and press the <Enter> key.
The “Select Device” dialog box will appear. Select the “Chips
and Tech 69000 PCI”.

(6).

Follow the remaining instruction that appear on the screen to
complete the rest of the installation, then restart your computer.

3. Install VGA driver to Windows NT 3.5x/4.0

(1).

To install VGA drivers to Windows 3.5x/4.0 is as you
normally would. Click START, then SETTINGS, then
CONTROL PANEL of the operating system.

(2).

Select the DISPLAY icon to start the DISPLAY
PROPERTIES window, then choose the SETTING tab, then
DISPLAY TYPE.

(3).

In the CHANGE DISPLAY TYPE window, click on the
CHANGE button in the ADAPTER TYPE, this will bring up
the SELECT DEVICE window.

Содержание ProX-1550















































































































Результаты поиска

Содержание ProX-1550

Отзывы:

Бренды по названию

Популярные бренды

protech ProX-1550, Руководство пользователя

Результаты поиска

Содержание ProX-1550

Отзывы:

Бренды по названию

Популярные бренды