Protech Systems PA-6822, Руководство пользователя

Страница: 102 / 250

Chapter 3 Software
ESC D n1…nk NUL
[Name] Set horizontal tab position
[Format]
ASCII ESC D n1...nk NUL
Hex. 1B 44 n1...nk NUL
Decimal 27 68 n1...nk NUL
[Range]
1
≤
n
≤
255
0
≤
k
≤
32
[Description]
Sets horizontal tab position
n specifies the column number for setting a horizontal tab position from the left
margin or the beginning of the line.
k indicates the number of horizontal tab positions to be set.
ESC E n
[Name] Turn emphasized mode on / off.
[Format]
ASCII ESC E n
Hex. 1B 45 n
Decimal 27 69 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
This command turns emphasized mode on or off by toggling the least significant bi
of n like following.
When the LSB of n is 0, emphasized mode is turned off.
When the LSB of n is 1, emphasized mode is turned on.
ESC G n
[Name] Turn double-strike mode on/off.
[Format]
ASCII ESC G n
Hex. 1B 47 n
Decimal 27 71 n
[Range]
0
≤
n
≤
255
Initial Value n = 0
[Description]
Specifies or cancels double printing.
Cancels double printing when n = <*******0>B.
Specifies double printing when n = <*******1>B.
n is effective only when it is the lowest bit.
This printer is not capable of double printing, so the print is the same as
when using emphasized printing.
This command is enabled for ANK characters
ESC J n
[Name] Print and feed paper.
[Format]
ASCII ESC J n
Hex. 1B 4A n
Decimal 27 74 n
[Range] 0
≤
n
≤
255
[Description]
This command prints the data in the print buffer and feeds the paper [n X
vertical motion unit].
Sets the print position to the beginning of the next line after printing.
PA-6822 Series User Manual Page