Protech Systems MP-1060, Руководство пользователя

Страница: 10 / 140

Chapter 1 Introduction
Page: 1-6
MP-1060 USER

S MANUAL
1-4. SAFETY PRECAUTIONS
Following messages are safety reminders on how to protect your systems from
damages. And thus, helps you lengthen the life cycle of the system.
1. Check the Line Voltage
a. The operating voltage for the power supply should cover the range of
100VAC-240V AC, otherwise the system may be damaged.
2. Environmental Conditions
a. Avoid extremely hot or cold places to install MP-1060.
b. Avoid exposure to sunlight for a long period of time (for example in a closed
car in summer time. Also avoid the system from any heating device.). Or do not
use MP-1060 when it‘s been left outdoors in a cold winter day.
c. Bear in mind that the operating ambient temperature is from 5

C up to +35

C.
d. Avoid moving the system rapidly from a hot place to a cold place or vice
versa because condensation may come from inside of the system.
e. Place MP-1060 against strong vibrations, which may cause hard disk failure.
f. Do not place the system too close to any radioactive device. Radio-active
device may cause interference.
3. Good Care
a. When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
b. Never use strong agents such as benzene and thinner to clean the system.
c. If heavy stains are present, moisten a cloth with diluted neutral washing agent
or with alcohol and then wipe thoroughly with a dry cloth.
d. If dust has been accumulated on the outside, remove it by using a special
made vacuum cleaner for computers.