7
The post cap plate must be used to hold posts at all times. Under no
circumstances should the post be held manually while operating the Post
Driver.
Only the operator must control the Post Driver, Spectators must be kept away
from the machine at all times.
Ensure that the tractor meets the minimum weight recommendations of the
machine manufacturer.
Ensure that the tractor is in correct working condition, with correct fluid levels.
Ensure that all safety guards are fitted and in good condition.
Ensure that machine fittings and couplings are in good condition.
Ensure that all warning labels are always visible and not damaged, defaced or
missing
Ensure the operator is protected from noise. Ear defenders should be worn.
Ensure the operator is protected from flying debris. Safety glasses should be
worn.
Always ensure no person is operating or on the tractor while the operator is
near to or using the machine.
Always ensure when you remove your machine from the tractor that it is left in
a safe and stable position using the stands and props provided and secured if
necessary.
Always check for worn hydraulic components.
Always ensure the rope is not damaged. Replacements must be a certified
Protech rope.
When working on sliding ground, it is far safer to drive up and down rather than
across the slopes.
During maintenance or adjustments:
Ensure that the weight is fully down, with the rope relaxed.
Ensure that the hydraulic pressure is released.
Ensure that the Tractor engine is switched off.
During Transport ensure:
That the weight is fully down
That the Post Driver is carried low to the ground and with the mast
crowded back for stability and maximum clearance from overhead
obstructions.
Always drive at a safe speed and in complete control of the vehicle.
