V4.0_2021-05-26
PROGNOST C Instructions for use
5073-0-0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
11 von 30
2.1
General safety notice
2.1.1
Requirements for operation
WARNING!
Protection Class I ME device
To reduce the risk of electric shock, this unit is designated exclusively for
connection to a supply network with protective earth.
The power for the components of radiographic system PROGNOST C is
designated to be exclusively supplied through a direct connection to the
available X-Ray generator.
The PROGNOST C is a ME Class I product (according to EN 60601-1). To reduce
the risk of electric shock, this unit is designated exclusively for connection to a
supply network with protective earth.
WARNING!
The positioning and support of a patient on the X-ray system table must not
be carried out without an X-ray mattress!
2.1.2
Operating of the radiographic system
When having troubles with operating of the PROGNOST C, immediately call the Service of PROTEC or
an authorized service and stop the using of the PROGNOST C.
2.1.3
Operating personnel
The PROGNOST C should only be operated by personnel who are trained in accordance with the
corresponding national regulations in the use and operation of diagnostic X-Ray systems.
NOTE
Only properly trained and authorized personnel are allowed to word with the
PROGNOST C.
The user, as well as the service personnel, must pay attention to the warnings, notices and safety
instructions located on the device and in the user manual. Failure to comply with the information
provided can lead to injury.
NOTE
Operating personnel are required to acquaint themselves with all warnings
(warning signs) located on the device. They serve to ensure the safety of the
operator as well as others and set a basic for orderly operation.
