Protec 4486-9-1000L, Инструкция по установке и эксплуатации, Страница: 16 / 20

RAPIXX DR System Installation & User Manual 5420-0-0004
16 of 20
8
Handling of the RAPIXX DR system
8.1 Operation of the RAPIXX DR system
8.1.1 Startup order for daily use
If CONAXX 2 cannot connect to the modality or generator after launching the program there will
appear an error message. In this case, CONAXX 2 has to be restarted to initiate a new connection.
Further hints you can find in the indicated error message.
If no error message appears after starting the program, the connection was established successfully.
8.1.2 Error during operation with the X-ray generator
Should an error appear during the daily operation with the X-ray generator, the error message will
show hints to solve the problem.
Is the connection to the generator during operation with CONAXX 2 interrupted, CONAXX 2 has to be
restarted to establish a new connection. If no error message appears after the restart, the connection
has been established successfully and the generator can be used.
8.1.3 Error during operation with the modality
Should an error appear during the daily operation with the modality (e.g. communication error, power
blackout), the error message will show hints to solve the problem.
Is the connection to the modality during operation with CONAXX 2 interrupted, CONAXX 2 has to be
restarted to establish a new connection. If no error message appears after the restart, the connection
has been established successfully and the modality can be used.
8.2 Operation of the CONAXX 2 software
Detailed information please find in the enclosed user manual of the CONAXX 2 software.
Note
To keep the image quality and the battery power in wireless detector systems optimally, it is
recommended to click the “Start exposure” button in the CONAXX 2 software first, when
everything is prepared for the exposure (e.g. patient positioning) and the X-ray system is ready
to release.
8.3 Operation of the detector with accessories
Detailed information please find in the enclosed original user manual
Varian Pax Scan 2530W Operating
Instructions
of the detector manufacturer
.
1.
Switch on
X-ray generator
Switch on detector
2.
Wait
15 seconds
3.
Start CONAXX 2
4.
The system is now ready to use .