39
MARK76V3002 Rev 3
Standby Mode
When the unit is in standby mode, you can change the decorative lighting on the tanning
device.
Stopping the Tanning Session
If the time in the session runs out naturally then the unit will go into a 3 minute cool-down.
However if you need to stop the tanning session prior to end of the sesion you can do so by
hitting the START/STOP Button.
To pause the tanning session you can hit the START/STOP button once.
Then to completely stop the tanning session prior to the end of our session time hit the
START/STOP button twice and the unit will go into Cool-down mode
.
Reading Hour Counter:
Hour counter lamps x 10
Reset hour counter lamps
Hour counter sun bed x10 (not able to reset)
This symbol will appear on the LCD display after 500 tanning hours. It is
preferable after 800 tanning hours to replace the lamps with new ones. After
replacing the lamps reset the lamp hour counter.
Note:
The exposure label on the front of the unit shows the lamps that are
suitable for your unit.
