manualshive.com logo in svg

Prostat PRS-801, Руководство пользователя

Поделиться
Скачать
Prostat PRS-801 Скачать руководство пользователя страница 8

8

Rev. C  / January 2012

PRS-812 Resistance Meter

CAUTION

Storage or use of this instrument in high humidity, damp or wet conditions  

may cause damage to the instrument’s electronic circuits, effect performance 

and can increase the possibility of personnel shock or arc discharge.

 

F.  Do not use the PRS-812 in combustible or explosive environments

WARNING

Improper handling and use of energized circuits may cause arc discharge,  

which in turn may cause the ignition of combustible materials or fumes.  

Do not use exposed energized circuits in flammable areas.

 

G.  Do not attempt to measure energized circuits with the PRS-812

 

H.  Do not use the PRS-812 if it becomes damaged in any way

 

I.  Only Prostat trained instrument personnel should attempt to service or repair the PRS-812

 

J.  Other Safety & Operating Considerations

1.  This manual displays cautions and warnings alerting the user to hazardous operation and ser-

vicing conditions. 

CAUTION

 or 

WARNING

 headings throughout this publication flag this infor-

mation, where appropriate.  Follow all caution and warning instructions at all times.

 

2.  The PRS-812 is a precision instrument and should be operated by experienced personnel famil-

iar with the use and handling of devices containing power supplies. 

 

 

CAUTION

The PRS-812 Contains Electrostatic Discharge Sensitive (ESDS) components 

and includes precision alignment of circuit elements. Only Prostat trained and 

ESD Qualified instrument repair personnel should perform service.

 

3.  The PRS-812 contains Electrostatic Discharge Sensitive (ESDS) components. Qualified personnel 

should service it only at ESD Controlled workstations. Do not attempt to dismantle the PRS-812 

Содержание PRS-801









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды