Page 6
5. The Parameters of the Remote WahWah
The parameters on the darker background in the upper right corner of the System Manager window are global. All
other parameters are preset based.
Global parameters
5.1 Global Parameters
MIDI Channel
Selects the MIDI receive channel of the Remote WahWah. “Omni” means that the WahWah receives on all MIDI
channels, respectively that the MIDI channel is ignored. If in doubt, the right setting is “Omni”.
Disable Time
This feature is only available when the “Auto Enable” function is active (see below). The “Disable Time” determines
how many seconds the expression pedal can remain unmoved before the WahWah jumps back to Bypass.
MIDI Out/Thru is
This determines whether the MIDI Out / Thru socket is used as MIDI Out or MIDI Thru. If you want to read the set-
tings from the Remote WahWah, it must be set to “Out” position. If you want to control another MIDI device after
the Remote WahWah, the connector must be confi gured as “Thru.”
Auto Wah - Tap CC No
The Remote WahWah has an Auto Wah function (see below). The speed of the Auto Wah can be tapped. Here,
you set the Control Change number for the tap command.
Auto Wah - Time (ms)
This is the time for the Auto Wah function that is used by the device after power up. This time can be overwritten
with the tap command. The values range from 40ms to 5000ms (= 5 sec).
5.2 Preset Related Parameters
We recommend to experiment a bit with all the parameters to understand their function. With the Remote Wah-
Wah, you can produce effects that differ quite a lot from a standard WahWah.
5.2.1 Basic Operation
Bypass / On
The Remote WahWah has a True Bypass. This means that in Bypass mode, the signal goes directly from the input
jack to the output jack without affecting the signal in any way.
Auto Enable
If this feature is active, the WahWah is basically set to Bypass. Once the expression pedal is moved, the WahWah
turns on. If the expression pedal does not move during a predefi ned time (see “Disable Time”), the WahWah
switches back to Bypass automatically.
WahWah / Volume (VCA)
The Remote WahWah can either be used as a WahWah or as a Volume pedal. Depending on the selected function,
not all parameters are available.
