manualshive.com logo in svg

ProSoft Technology RadioLinx RLXIB-IHW-66, Руководство пользователя, Страница: 51 / 109

Поделиться
Скачать
ProSoft Technology RadioLinx RLXIB-IHW-66 Скачать руководство пользователя страница 51

Radio Configuration / Diagnostic Utility 

RLXIB-IHW-66 

♦

 802.11a, b, g 

User Manual 

Industrial Hotspot 

 

 
ProSoft Technology, Inc. 

Page 51 of 109 

May 18, 2009 
 

It is important to allow many industrial protocols to communicate properly over 
the RLXIB radios. The standard 802.11 AP operation for transmitting broadcast 
messages is to accumulate them and transmit them only on specific time 
intervals. This allows clients that are in power-save mode to wake up at the 
synchronized time interval and receive the broadcast packets. However, the 
power-save mode is rarely used in industrial networks. Additionally, many 
industrial protocols utilize multicast traffic, which is sent as broadcast messages 
over the wireless network. By enabling immediate broadcasting, these multicast 
messages are not delayed by the wait for the next time interval to occur before 
they can be transmitted. This results in improved network performance. 

The settings on this form also allow you to configure the transmission rate and 
broadcast mode to optimize this radio's use on an industrial network.  

Field Description 

Max Data Rate 

The maximum data transmission rate, in megabits per second, for this 
radio. Available settings range from 1 to 54. 

Max Basic Rate 

In addition to the Data Rate setting which controls generic data traffic, 
the Basic Rate setting adjusts the rate at which control packets such 
as Beacons and Acks are sent at as well as packets that need to go to 
the whole network such as Broadcasts. Because these packets are 
intended for the whole network, the Max Basic Rate setting of the 
Master is advertised to each of the radios in the network through 
Beacons. Each radio, other than the Master, then inherits the Max 
Basic Rate setting of the Master. Therefore the setting only needs to 
be made in the Master radio. The setting in each of the other radios is 
disregarded. 

Immediate Broadcasting 

Forward multicast traffic immediately, rather than waiting for specific 
time intervals.  

Block General Probe 
Requests 

Do not respond to general probe requests that are not specific to the 
radio's SSID. 

Range 

The Range setting allows the radios to account for round trip delays. 
The Range settings should be the same in all radios in the network 
and should be at least large enough to account for the length of any 
links. However, increasing the Range beyond what is necessary can 
cause a slight decrease in throughput. 

TX Power 

This sets the output power of the radio. 

Save 

Saves your changes and updates the radio configuration. 

Cancel 

Discards your changes without updating the radio configuration. 

Содержание RadioLinx RLXIB-IHW-66














































































































Отзывы:

Нет отзывов