PLX51-DL-232
Setup
Data Logger
User Manual
ProSoft Technology, Inc.
Page 14 of 59
3.2 Network Parameters
3.2.1 DHCP Server Settings
By default, the PLX51-DL-232 has DHCP (Dynamic Host Configuration Protocol)
enabled. Thus, a DHCP server must be used to provide the PLX51-DL-232 with the
required network parameters (IP address, subnet mask, etc.). There are a number of
DHCP utilities available. However, it is recommended to use the DHCP server in the
PLX50 Configuration Utility.
1
Within the PLX50 Configuration Utility, click on
T
OOLS
>
DHCP
S
ERVER
.
Figure 3.2. - Selecting DHCP Server
2
Once opened, the DHCP server listens on all available network adapters for DHCP
requests and displays their corresponding MAC addresses.
Figure 3.3. - DHCP Server
