ProSoft Technology PLX51-DL Скачать руководство пользователя

Страница: 12 / 59

PLX51-DL-232

Installation

Data Logger

User Manual

ProSoft Technology, Inc.

Page 12 of 59

2.3 Power

A three-way power connector is used to c positive, - negative, and Earth. The

PLX51-DL-232 requires an input voltage of 10 to 28 Vdc.

Figure 2.5. - Power connector

2.4 RS232 Port

The RS232 connector is used to connect the Transmit (Tx), Receive (Rx), and Ground

conductors for serial communication. The shield terminal can be used for shielded cable

in high noise environments.

Important:

The shield of the RS232 port is internally connected to the power connector earth. Thus, when

using a shield it is important to connect the Earth terminal on the power connector to a clean earth. Failing

to do this can lower the signal quality of the RS232 communication.

Important:

When using a shielded cable, it is important that only one end of the shield is connected to earth

to avoid current loops. It is recommended to connect the shield to the PLX51-DL-232, and not to the other

Serial device.

Figure 2.6. - RS232 connector

2.5 Ethernet Port

The Ethernet connector should be wired according to industry standards. Refer to the

additional information section in this document for further details.

Содержание PLX51-DL




























































Результаты поиска

Содержание PLX51-DL

Отзывы:

Похожие инструкции для PLX51-DL

Бренды по названию

Популярные бренды

ProSoft Technology PLX51-DL, Руководство пользователя

Результаты поиска

Содержание PLX51-DL

Отзывы:

Похожие инструкции для PLX51-DL

Бренды по названию

Популярные бренды