ProSoft Technology InRax MVI71-DNPSNET, Руководство пользователя

Страница: 19 / 100

Module Configuration MVI71-DNPSNET ♦ PLC Platform
Distributed Network Protocol Interface Module
ProSoft Technology, Inc. Page 19 of 100
September 22, 2008
2 Module Configuration
In This Chapter
™ Installing and Configuring the Module ................................................... 19
™ IP Address............................................................................................. 22
™ Uploading and Downloading the Configuration File............................... 23
In order for the MVI71-DNPSNET module to function, a minimum amount of
configuration data must be transferred to the module. A text file named
DNPSNET.CFG is shipped with the module. This file can serve as a starting
point to develop a user application. Edit the file to configure the module for the
application.
A terminal server program is used to upload and download the configuration file
to the module. An additional file, WATTCP.CFG, must be configured for the
specific network on which the module resides.
2.1 Installing and Configuring the Module
This chapter describes how to install and configure the module to work with your
application. The configuration process consists of the following steps.
1
Modify the module's configuration files to meet the needs of your application,
and copy the updated configuration to the module. Example configuration
files are provided on the CD-ROM. Refer to the Modifying the Example
Configuration File section, later in this chapter, for more information on the
configuration files.
2
Modify the example ladder logic to meet the needs of your application, and
copy the ladder logic to the processor. Example ladder logic files are provided
on the CD-ROM.
Note: If you are installing this module in an existing application, you can copy the necessary
elements from the example ladder logic into your application.
The rest of this chapter describes these steps in more detail.
Before installing and configuring the module, design the application. Determine
the number points for each data type. Review the
Application Design
section to
aid in application design.
It is now time to edit the DNPSNET.CFG file to set up the module for the specific
application. Refer to the
Configuration File
section of this document. Download
this configuration to the module along with the associated ladder logic.