Diagnostics and Troubleshooting
MVI56-HART ♦ ControlLogix Platform
User Manual
HART Multi-drop Master Communication Module
Page 64 of 171
ProSoft Technology, Inc.
October 13, 2011
1
Click to configure the connection. On the
Connection Setup
dialog box, select a valid
com port or other connection type supported by the module.
2
Verify that the null modem cable is connected properly between your computer’s
serial port and the module. A regular serial cable will not work.
3
On computers with more than one serial port, verify that your communication
program is connected to the same port that is connected to the module.
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.
Navigation
All of the submenus for this module contain commands to redisplay the menu or return to
the previous menu. You can always return from a submenu to the next higher menu by
pressing
[M]
on your keyboard.
The organization of the menu structure is represented in simplified form in the following
illustration:
The remainder of this section shows the menus available for this module, and briefly
discusses the commands available to you.
