X 2
Installation (continued)
8
Install the hand control switch holder hook
□
Secure the hand control switch holder (H) to a convenient location on the closest appropriate wall using the power cord cable
clamps (J) and screws (W).
□
If your cables are too long, use the supplied cable ties to coil them close to the motor for a clean finish.
15 PROSLAT.COM
Please contact 1-888-801-1801 for further assistance.
TIP: IT IS SUGGESTED YOU INSTALL YOUR
CONTROLLER HOLDER FIRST AND RUN YOUR
WIRE BACK TO THE MOTOR. THIS WAY YOUR
EXCESS CABLE WILL BE UP AT THE MOTOR. USE
THE SUPPLIED CLIPS TO ATTACH TO THE WALL.
