19
PRS-UM-DP32-EN-Rev.02-05.2019
You can switch between channels via using UP or DOWN buttons. Also you can directly reach
alarm logs screen via pressing MENU button in single channel mode. Logs keep alarm and
fault details with their date and time for last 24 hours. You might use UP and DOWN buttons
to see all records. Press EXIT button to return main menu. Screen will automatically exit from
the single channel menu to main menu after 2 minutes if there is no user action.
Setup Channel Parameters:
To adjust channel parameter follow below steps.
1- Press Menu button for 2 seconds. The screen will display menu options:
2- Select Channel setting via pressing the MENU button. Screen will list channels:
3- Move desired Channel from the list via using UP and DOWN buttons and press MENU
button to select channel. A new menu will display with below options:
4- S-DP32 panel automatically recognize the measurement unit and range while
communicating the detector. Therefore these settings cannot be changed by user. To adjust
alarm level settings select "Level Settings" option. Screen will display default alarm level
settings:
